Green Wax Casting Resin (700D)

IFUN resin provides a one-stop solution for jewelry manufacturing, with its unique low shrinkage formula ensuring excellent direct casting results. This allows jewelry designers to achieve more precise and high-quality works.

  • Extremely low shrinkage less than 0.25%
  • No stacking, no adhesion
  • Fine detail restoration
  • Casting with low thermal expansion
  • Simple post-processing
Get A Free Sample

Extremely Low Shrinkage

with an absolute dimensional error within the range of 0.01-0.03 when used with compatible printers, and a shrinkage rate not exceeding 0.25%. This ensures dimensional accuracy of castings, with most tolerances within reasonable ranges

No Piling, No Adhesion

It excels in areas with special structures, such as side holes and fine clearances (0.2mm), avoiding piling and adhesion issues, thereby preserving the integrity and precision of castings.

Fine Detail Reproduction

can clearly depict the clasps in diamond settings,with high fidelity in concave-convex shapes, clear organization of filament structures, and sharp angles. It also achieves high fidelity in reproducing specific details, meeting the meticulous design requirements.

Convenient Post-processin

Post-processing is simple and time-saving, significantly enhancing production efficiency and reducing the time and manpower required for subsequent processing steps.

Temporary Crown Application

How to Make and Use 3D Printed Temporary Crown Resin >>

The application process of 3D printing temporary dental crowns using resin involves the following steps:

  1. Scanning the patient’s teeth and gums using a 3D scanner or dental impressions.
  2. Designing a 3D model of the tooth using CAD/CAM software based on the scans.
  3. Slicing the 3D model into layers and preparing it for printing.
  4. Printing the model layer by layer using dental crown resin.
  5. Washing and curing the printed model to remove excess resin and harden it.
  6. Polishing the crown to give it a smooth texture.
  7. Applying a layer of glaze or enamel to the crown for added protection and natural appearance.
  8. Disinfecting the crown to ensure it is safe for use.
  9. Fitting the temporary dental crown onto the patient’s tooth.
  10. Temporarily cementing the crown onto the tooth until a permanent crown can be made and installed.

Specifications of Green Wax Resin(700D)

  • Parameters
  • Post-processing
  • Content Data value Testing method
    Viscosity 280cps(25℃) ASTM D1084-1997
    Density 1.05~1.1g/cm³ ASM D1875-69(1980)
    Shrinkage <0.25% Capillary method
    Hardness 40D ASTM D2240-05(2010)

    1. Clean the residual resin on the model surface for about 30 seconds
    2. Clean the model with clean alcohol for about 1 minute
    3. Ultrasonic cleaning for 2 minutes
    4. Take out the model and blow dry the alcohol on the model
    5. Post-cure for 5 minutes

Green Wax Print Samples

Enable 3D Digital Production

CONTACT