Elastic Resin(#3130)

  • High soft and high elastic
  • TPU-like material
  • Good tear resistance
  • Flexibility
SKU: IF3130Categories: Resin

BPA Free

C6H6 Free 

High soft and high elastic

Good elasticity for printing parts that can be bent, stretched, compressed, recyclable and not easily torn.

TPU-like material

Good simulation of 50~60A TPU, direct printing saving time and cost.


Good tear resistance

Can be folded many times without breaking. Good tear resistance, not easy to crack, good bendability, strong resistance to bending, continuous and stable, easy to stretch.



IFUN elastic resin not only considers elasticity, but also has a certain softness moderate elasticity and a surface hardness of 60A.

  • Caution
  • Post-processing
  • Parameters
  • Package & Delivery
    • The elastic material is soft and should be thickened when printing.
    • After printing, clean it with alcohol and solidify, then put it in the oven to heat after solidification, the performance will be better.
  • 3130 Elastic resin post processing

  • ContentData valuePost-CuredTesting method
    Ultimate Tensile Strength1.21MPa2.86MPaASTM D 412-06 (A)
    Stress at 50% elongation0.62MPa0.64MPaASTM D 412-06 (A)
    Stress at 100% elongation1.18Mpa1.20MPaASTM D 412-06 (A)
    Elongation at Failure80%105%ASTM D 412-06 (A)
    Tear strength6.7kN/m16.1kN/mASTM D 624-00
    Shore hardness60A70AASTM D2240
  • package&delivery

You May Also Like