WAX ULTRA 190 DLP Printer—Ultra-Fast for Fine Jewelry Designs
The WAX ULTRA 190 is a DLP 3D printer specifically designed for fine jewelry casting. It not only effortlessly reproduces the most intricate details of jewelry designs but also ensures consistency across models and stable output. Even with high-frequency daily printing, this DLP printer maintains a low failure rate and high material utilization, all while boosting production efficiency and lowering maintenance costs.
Get A QuoteProduct Highlights
Easily print fine jewelry designs
WAX ULTRA 190, thanks to its use of DLP printing technology, can accurately reproduce any microstructures, whether they are complex hollow-out patterns, delicate claw settings, or engraved characters on the ring shank, card slots, etc. For jewelry designs that perform poorly on 16K LCD 3D printers, WAX ULTRA 190 can easily replicate them.
When printing jewelry designs of different complexity levels simultaneously, the average error between the printed part and the CAD design is only 0.018mm ( meeting the industrial-grade high-precision printing standard ISO 2768-M ).
Time: 58 min
Height: 29.46 mm
Output/Print: 105 pcs
Daily Output: 2,606 pcs
Height: 29.46 mm
Output/Print: 105 pcs
Daily Output: 2,606 pcs
Time: 1h5min
Height: 33.74 mm
Output/Print: 15 pcs
Daily Output: 328 pcs
Height: 33.74 mm
Output/Print: 15 pcs
Daily Output: 328 pcs
Time: 2h11min
Height: 66.91 mm
Output/Print: 24 pcs
Daily Output: 262 pcs
Height: 66.91 mm
Output/Print: 24 pcs
Daily Output: 262 pcs
Time: 34 min
Height: 12 mm
Output/Print: 17 pcs
Daily Output: 5,040 pcs
Height: 12 mm
Output/Print: 17 pcs
Daily Output: 5,040 pcs
High Speed: Rapid Response, Unleashing Production Potential
In the competitive jewelry market, efficiency is key. The ultra-fast printing capability of the WAX ULTRA 190 helps you quickly respond to market changes and accelerate your product launch cycle.
Consistent Prints, Scalable Output, Minimal Waste
Powered by high-precision DLP exposure control, each full-batch print achieves exceptional consistency: post-cured rings maintain a weight deviation within 1.3%, with an overlap rate of ≥98.7%. This outstanding dimensional and weight uniformity significantly reduces the need for inspection and rework, enabling every model to seamlessly enter downstream processes like post-curing and casting — making it an ideal solution for stable, scalable, and high-frequency jewelry production.
| Item | DLP Printer | LCD Printer |
|---|---|---|
| Light Source Life | ≥ 20,000 hours | About 2,000–3,000 hours |
| Release Film Life | ≥ 500,000 cycles | No oxygen-permeable film / relies on peeling |
| Stability | Stable under long-term high-frequency operation | Prone to aging after long operation |
| Overall Maintenance Frequency | Low | High |
| Item | DLP Printer (Oxygen-Permeable Film) | LCD Printer (FEP Film) |
|---|---|---|
| Release cycles per print | ~600 cycles (based on layer count) | ~600 cycles |
| Total release cycle lifespan | ≥ 500,000 cycles | ~60,000–120,000 cycles |
| Supported full prints | 800+ full prints | 100–200 full prints |
| Production suitability | Highly suitable for batch production | Frequent film replacement needed |
Durable Performance, Minimal Downtime
Beyond just high precision and fast printing, the long-term reliability and maintenance of your equipment are crucial. The WAX ULTRA 190 is built for sustained, high-volume production.The combination of the DLP light engine, oxygen integration technology, and the oxygen-permeable film extends the machine's durability. This extended durability significantly reduces the frequency of component replacement and associated costs, minimizing downtime and ensuring continuous, high-volume production with fewer interruptions.
Technical Specifications
Building size
192*108*150mm
Operation mode
10 inch OLED smart screen
Native Pixel Size XY
50μm
XY Resolution
±0.05mm
Dynamic Layer Thickness
0.025-0.1mm
Molding speed
20~25mm/hour
Molding method
DLP
Software
ChiTu Box
Transmission mode
USB transmission,WIFI,wired network
The data format
STL,OBJ,SLC
Voltage
240V/110V 50Hz
Power
250W
Equipment Weight
82Kg
Working environment
20℃-30℃
Customer Testimonials
June 22, 2025
"For high-precision jewelry, I used to have to sacrifice speed to get the detail I wanted. But with this DLP printer, I get both quality and speed. My daily ring output has tripled compared to before."
— Emily Zhao
June 28, 2025
"I often print jewelry with intricate structures. My previous LCD printer would randomly fail—either with delamination or warped features. The WAX ULTRA 190 gives me consistent precision and reliable output. Big thanks to the IFUN technician who helped fine-tune the settings."
— Carlos Mendez
July 2, 2025
"The WAX ULTRA 190 is a great 3D printer. It’s much faster than the machines I used before—though admittedly more expensive. Still, the print quality is consistently high, and nearly every piece casts beautifully."
— Nguyen Tran
FAQs
What is the printing precision of the WAX ULTRA 190?
The WAX ULTRA 190 achieves high-precision printing with an average absolute error of ≤0.02mm and a maximum error of just 0.04mm. It supports a minimum wall thickness of 0.3mm and a minimum gap of 0.25mm, accurately reproducing complex filigree, micro-set holes, and other fine details, meeting over 95% of commercial jewelry design requirements.How much faster is this DLP printer compared to other technologies?
While maintaining high precision, the WAX ULTRA 190 boasts a printing speed of 15mm/h, making it twice as fast as LCD machines using the same resin. For instance, it can print 105 rings in less than 2 hours, significantly boosting your production efficiency.Which materials are compatible with the WAX ULTRA 190?
The WAX ULTRA 190 is compatible with IFUN’s white wax T900 resin, and also with the T700 green wax casting resin solution. It is specifically designed for precision casting of jewelry, offering high precision, detail, and casting success for various jewelry models.Is post-processing complicated after printing?
Wax molds printed by the WAX ULTRA 190 have excellent surface layer control and very shallow pixel textures. Support diameters can be as thin as 0.25mm and support volume is 60% less than LCD, with some models even requiring no support. Supports can be removed by hand with no visible marks, greatly reducing post-processing time and effort, allowing for direct casting.What are the stability and maintenance costs of the equipment?
The WAX ULTRA 190’s projector has a lifespan exceeding 20,000 hours, and its oxygen-permeable film can withstand 500,000 releases, far surpassing industry standards. Its high light uniformity ensures consistent quality across full-plate prints, with a weight overlap rate of ≥98.7%, significantly reducing printing failure rates and maintenance frequency, saving you long-term operational costs.
Overview of 3D Printing Effects
Easily print fine jewelry designs
WAX ULTRA 190, thanks to its use of DLP printing technology, can accurately reproduce any microstructures, whether they are complex hollow-out patterns, delicate claw settings, or engraved characters on the ring shank, card slots, etc. For jewelry designs that perform poorly on 16K LCD 3D printers, WAX ULTRA 190 can easily replicate them.
When printing jewelry designs of different complexity levels simultaneously, the average error between the printed part and the CAD design is only 0.018mm ( meeting the industrial-grade high-precision printing standard ISO 2768-M ).
Watch the Wax ULTRA 190 in Action
Industrial-Grade Speed & Precision for Fine Jewelry Casting
The Wax ULTRA 190 DLP Printer delivers exceptional accuracy and fast output, making it a reliable solution for jewelry manufacturers. With stable performance and fine detail reproduction, it handles even delicate structures like micro gaps and thin walls with ease.
- Oxygen DLP Technology
Smooth, release-force-free printing for complex structures with minimal support. - Ultra-Fine Detail Reproduction
Prints even the smallest movable gaps and thin walls with stunning precision. - 4K Optical Engine from German Instruments
Delivers high light uniformity and excellent surface quality across the entire build plate. - Smart Control System
Each printer operates like a mini computer, using intelligent algorithms developed by IFUN to ensure fidelity to your original CAD designs. - Perfect for Casting & Batch Production
Whether it’s a one-off masterpiece or large-volume output, enjoy stable performance and consistent quality.
Overview of 3D Printing Effects
Enable 3D Digital Production
Wax Plus 210
designed for gem setting
Excellent stable light source
Thermostatic system
Efficient production
Gold Giant 14K
Print 135 rings at once
16 micron ultrafine surface
Small amount support printing
Making complex wax models
HP-J800(curing box)
Model solidification Booster
800 watts curing power
Efficient batch curing
Improve casting effect
iFUN3D provides a variety of jewelry 3D printing resins according to different casting needs of jewelry.
See More Resins