JEWELRY CASTABLE RESINS

Jewelry 3D Printing Castable Resins for Investment Casting

Professional jewelry castable resins developed for 3D-printed patterns and lost-wax investment casting. Choose from formulations optimized for fine-detail printing, production workflows, balanced high-wax performance, complex geometries, thin-wall designs, and stone-setting applications.

Explore Jewelry ResinsGet a Quote

RESIN SELECTION

Compare Jewelry Castable Resins for 3D Printing

Compare key material properties, recommended applications, and technical data across the IFUN jewelry castable resin range to identify the material best suited to your printing and casting workflow.

Model	Recommended For	What Sets It Apart	Key Technical Data
700D	Intricate jewelry requiring fine detail, precise features, and strong dimensional fidelity	Very low shrinkage and fine-feature reproduction for demanding jewelry geometries	Shrinkage: <0.25% · Min. Wall: 0.20 mm · Filigree: 0.25 mm · Hardness: 56D
900D	Production-oriented jewelry workflows where a consistent transition from printed pattern to casting is a priority	Production-focused high-wax formulation with controlled viscosity, density, dimensional stability, and clean burnout characteristics	Viscosity: 260 cps · Density: 1.128 g/cm³ · Shrinkage: ≤0.8% · Hardness: 47D
800D	General jewelry production, especially thicker or heavier patterns where printability, pattern mass, and casting performance all need to be balanced	Balanced high-wax behavior with relatively lower pattern mass, supporting a practical workflow across a range of jewelry designs	Density: 1.2–1.3 g/cm³ · Viscosity: 260 cps · Shrinkage: ≤0.8% · Hardness: 75A–35D
300H	Cost-conscious production of thin-wall, hollow, silver, copper, and other non-ferrous jewelry	Practical balance between detailed printing and material cost for broader production applications	Shrinkage: ≤0.6% · Min. Wall: 0.30 mm · Viscosity: 360 cps · Hardness: 52D
500B	Complex jewelry patterns with tight clearances, closely spaced features, interlocking structures, micro-prongs, and fine filigree	Fine-clearance reproduction supported by a 40% wax-filled formulation and a 0.18 mm minimum XY clearance	Wax Content: 40% · Shrinkage: <0.25% · XY Clearance: 0.18 mm · Min. Wall: 0.20 mm
600G	Detailed jewelry patterns including floral rings, fine filigree, fine-wire structures, and stone-setting designs	Versatile detailed-jewelry performance, with additional support for pre-cast micro-setting, prong setting, and channel setting workflows	Hardness: 49D · Shrinkage: <0.6% · Fine Feature: 0.22 mm · Viscosity: 260 cps
3123	Jewelry master patterns for vulcanized rubber and RTV silicone mold production	High hardness and heat resistance for reusable master patterns rather than direct investment-casting patterns	Hardness: 85D · HDT: 120–140°C · Flexural Modulus: 3000–3800 MPa · Shrinkage: <1%

EXPLORE THE RESIN RANGE

Jewelry Castable Resins for Different Production Needs

FINE-DETAIL CASTING

700D — Fine-Detail Jewelry Castable Resin

For intricate jewelry designs where fine features and dimensional fidelity are critical. Its ultra-low volumetric shrinkage and fine-feature capability support detailed filigree, micro-pavé, stone-setting structures, and other demanding patterns for lost-wax investment casting.

VOLUMETRIC SHRINKAGE

<0.25%

MIN. WALL THICKNESS

0.20 mm

FILIGREE FEATURE

0.25 mm

PRINT SPEED

9.5 mm/h @ 0.03 mm layer

View 700D ResinGet a Quote

Lion head green wax ring set with diamonds

PRODUCTION CASTING

900D — Production-Focused High-Wax Jewelry Castable Resin

Built for a production-oriented print-to-casting workflow on standard 405nm LCD and MSLA systems. Its 260 cps viscosity, controlled shrinkage, stabilized cured density, and clean burnout characteristics make it a practical high-wax option for jewelry pattern production and precious-metal casting.

PRINTER COMPATIBILITY

405nm LCD / MSLA

VISCOSITY

260 cps @ 25°C

CURED DENSITY

1.128 g/cm³

VOLUMETRIC SHRINKAGE

≤0.8%

View 900D ResinGet a Quote

BALANCED HIGH-WAX CASTING

800D — Balanced High-Wax Jewelry Castable Resin

A balanced high-wax option for jewelry patterns where printability, pattern mass, and casting performance all need to be considered. Its 1.2–1.3 g/cm³ pattern density is particularly relevant to thicker or heavier designs, while 260 cps viscosity supports resin flow across compatible LCD, MSLA, and oxygen-permeable printing systems.

PATTERN DENSITY

1.2–1.3 g/cm³

VISCOSITY

260 cps @ 25°C

VOLUMETRIC SHRINKAGE

≤0.8%

HARDWARE COMPATIBILITY

LCD / MSLA

View 800D ResinGet a Quote

COST-EFFICIENT CASTING

300H — Thin-Wall Jewelry Castable Resin for Cost-Efficient Production

A cost-efficient option for thin-wall, hollow, and non-ferrous jewelry patterns. With a 0.3 mm minimum wall specification and ≤0.6% linear shrinkage, 300H provides a practical balance between detailed printing and material cost across silver, copper, and other non-ferrous casting workflows.

LINEAR SHRINKAGE

≤0.6%

MIN. WALL THICKNESS

0.30 mm

VISCOSITY

360 cps @ 25°C

HARDNESS

52D

View 300H ResinGet a Quote

FINE-CLEARANCE CASTING

500B — Fine-Clearance Jewelry Castable Resin for Complex Geometry

For jewelry patterns with tight clearances and closely spaced features. Its 40% wax-filled formulation, volumetric shrinkage below 0.25%, and 0.18 mm minimum XY clearance are suited to interlocking components, micro-prongs, fine filigree, and other complex jewelry geometries.

WAX CONTENT

40%

VOLUMETRIC SHRINKAGE

<0.25%

MIN. XY CLEARANCE

0.18 mm

MIN. WALL THICKNESS

0.20 mm

View 500B ResinGet a Quote

VERSATILE JEWELRY CASTING

600G — Versatile Jewelry Castable Resin for Detailed Des

Designed for detailed jewelry patterns including floral rings, fine filigree, fine-wire structures, and stone-setting designs. Its 49D hardness, <0.6% volumetric shrinkage, and 0.22 mm fine-feature capability help reproduce delicate geometries with consistent dimensional control, while also supporting pre-cast micro-setting, prong setting, and channel setting workflows.

HARDNESS

49D

VOLUMETRIC SHRINKAGE

<0.6%

FINE FEATURE

0.22 mm

WAVELENGTH COMPATIBILITY

385nm / 405nm LCD

View 600G ResinGet a Quote

A collection of 3D - printed jewelry pieces in a vivid yellow color, inspired by flowers. Each piece has a delicate, mesh - like structure, with some resembling blooming petals and others having a circular, fan - like shape. They stand on thin supports against a dark black background, giving an impression of floating, intricate floral artworks.

MASTER MOLD PRODUCTION

3123 — High-Hardness Master Mold Resin for Jewelry

For 3D-printed jewelry master patterns used to produce vulcanized rubber or RTV silicone molds—not for direct investment casting. Its 85D hardness, 120–140°C heat deflection temperature, and high rigidity support mold-making workflows where pattern stability and heat resistance are important.

HARDNESS

85D

HEAT DEFLECTION TEMP.

120–140°C

FLEXURAL MODULUS

3000–3800 MPa

LINEAR SHRINKAGE

<1%

View 3123 ResinGet a Quote

REQUEST A CUSTOM QUOTE

Get an Instant Quote for Your 3D Printing Setup

Connect with our application engineers to select the ideal 3D printer (Resin/Wax) and materials (Dental/Jewelry) for your production, complete with unit cost calculations and a customized proposal.

Need a Faster Response?

Chat directly with our sales engineers on WhatsApp for quick price estimates, resin matching, or bulk ordering details.

Start WhatsApp Chat

Request Your Official Quote

Complete the form below, and our team will provide a tailored quotation within 24 hours.